Martin - What type of antenna do you have attached to the BNC jack? Which antenna is selected with the ANT button? Are you listening in a ham band or outside?
Monty K2DLJ > Guys, the Main-RX and TX of K3 #2878 are up and running, thanks to the > hints from Markus and Chen. > > But not the sub-rx. > > All plugs mated > Checked the tmp-cables > Performed the calibration > No err-msgs > Sub-RX in config-menu set to *yes, installed* > ant = bnc > > no receive, only noise like there is no antenna connected, > noise characteristics change with selected filter (Bandwith/shift) > > Faint signals from *strong* stations. > > Signals from my K2 sound ok when i transmit into a dummy load and > receive them with the K3 sub-rx. > > So the sub-rx is not dead, but deaf. > > The K3 has sub-rx, KXV3, equal filters ssb/cw on both rx's , *no* KAT3. > > Where to begin the troubleshooting? > > Martin > > -- > > 73, DM4iM > > K2 #2706 , K3 #2878 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html