Another option for CW is CONFIG: OFF-KEY, this allows full break-in. Found it really useful in contests...
For FSK you need a second COM port and a simple transistor/resistor interface. Set both RTS and DTR to ALWAYS OFF on the second port. It's a bit of a bear to get through it all the first time. I fought with the set-up for a while but got a lot of good help here. I can forward a couple emails with some pointers I received... Works like a charm now. Cheers, Julius Iain MacDonnell - N6ML-2 wrote: > > > > Terry Dunlap wrote: >> OK...now that my K3 kit is complete I'd like to set up N1MM for CW & >> RTTY contests. I can ask this on the N1MM reflector but thought I'd try >> here first. Please respond direct if this is OT. >> >> How do I set up N1MM to have radio control, CW & PTT on the same COM? > > Just do it:) In the N1MM "Configurer", under the "Hardware" tab, check > the "CW" box next to the port you've configured for the K3, then click > on the "Set" button, set DTR to "CW" and RTS to "PTT". Then on the K3, > set CONFIG:PTT-KEY to "rts-dtr". > > Beware of this if you're considering SO2R CW with N1MM - it doesn't > like the same serial port being used for rig control and CW in that > case, but it seems OK with one radio. > > >> Also, I have FSK on another COM, do I set that up in N1MM or MMTTY? > > MMTTY. You tell N1MM that you're using FSK under the "Digital Modes" > tab of the "Configurer" (also set TU type to "Souncard" there), but > the specifics of FSK interfacing is configured in MMTTY. > > ~Iain / N6ML > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ----- Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2/100 #4455 Elecraft K3/100 #366 Elecraft K3 #1875 -- View this message in context: http://n2.nabble.com/K3---N1MM-for-RTTY-tp2870792p2884372.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html