Is anyone using the ALS-600 with their K2/QRP? Dick, K2ZR PS: Phil ( AS5X ) TU for the information on the ALS-600 and your K3
Dick Stein wrote: > Is anyone using the ALS-600 with their K2/QRP? > Dick, K2ZR > PS: Phil ( AS5X ) TU for the information on the ALS-600 and your K3 > > Phil & Debbie Salas wrote: > >> I just checked - my ALS-600 runs 80-100 watts out with 10 watts drive >> from my K3, though I normally run it at more like 500 watts output >> with about 70 watts drive. There is a 35 ohm resistor in series with >> the ALS-600 input that can probably be reduced to give you more >> output power. I have modified my ALS-600 for QSK operation and it >> works great with my K3 (see this month's QST or www.ad5x.com for >> details). >> >> Phil - AD5X >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html