Turns out our 1 PPM TXCO already hits 0.5 ppm from 10-50 C, which was the original goal for firmware-assisted temp compensation. So such compensation isn't necessary to hit that spec.
But in the spirit of making things as good as they can be, we're now hoping to achieve 0.3 ppm with firmware assist. K3 Utility will soon have a new screen for TCXO frequency/temp data entry. I will then have a bit more firmware to write to make use of the data. Thanks for your patience. Wayne N6KR On May 16, 2009, at 11:13 AM, howa...@howardz.com wrote: > Hi, > > I am wondering if the K3's firmware has implemented the 0.5 ppm when > using the KTCXO3-1 1ppm High Stability Reference Oscillator? > > N3ZH - Howard --- http://www.elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html