Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything is fine ever since. This is under Vista.
Mike Harris-9 wrote: > > G'day, > > Tried using my KUSB today. Loaded latest driver and all communicates well > between K3 Utility and K3. I modified the power on banner OK. > > Changed the com port in Logger32 to the same and after the first read of > frequency Logger32 freezes and needs the three finger salute. CPU seems > to be running at 100% > > K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com > port in Logger32 and it freezes. > > KUSB plugged into any USB port on the PC not via a hub. > > Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. > > Anyone else seen this? > > Regards, > > Mike VP8NO > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968624.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html