Joe, I am not certain what you are dong wrong (if anything). If it is intelligent and lucid for even brief moments, you likely have things correct, but you are getting data corruption somewhere.
Try increasing the data speed. Many USB to serial adapters work fine at high speeds, but will fail at lower speeds like 4800 bps. I know that is not 'intuitive', but it is 'just the way it is'. 73, Don W3FPR Joe Ford wrote: > I am trying to help a friend configure n1mm to work with his k3. My k3 works > fine with n1mm from both my desktop and laptop. They both use a serial db9 to > db9 connection. My friends laptop has no serial connection. We are using the > KUSB with drivers downloaded from the link on Elecraft's software page. Using > the same config I use for my pc/k3 (Off-DTR &4800b in the k3 and 4800,n,8,1; > dtr=cw rts=off) when we start n1mm we get errors from n1mm such as > EntryWindow (CommPort Dev_OnComm-6). Also intermittently we can connect and > read to rig info. But mostly we don't seem to connect. I got the comm port nr > from Device mgr. > > What are we doing wrong? > > Joe > k4nvj > k3#241 > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.13.21/2252 - Release Date: 07/21/09 > 05:58:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
