As you say Brett ... Interesting. I will try it again, and look for any new Menu settings that may have crept in unnoticed. This was on SSB, a mode which I use almost 100% of the time.
73 Stewart G3RXQ On Sat, 15 Aug 2009 02:24:57 -0700, Brett Howard wrote: > Interesting.. Mine seems to be working as it did before. I just tied > it on a few AM stations near 40. Got in the area in LSB got it setup > with the carrier in my window hit the button and poof gone. > > I then found another tone that seemed to be drifting back and forth a > little bit and hit the auto notch on that. It seemed to notch it but > was following it a bit slowly so it was just off of it every so often > but it was updating and keeping things quieter. > > I also QSYed quickly when the notch was doing its thing and you hear the > tone come back for a short bit then you hear the filter slide over and > keep the carrier covered up. > > Are you sure you're in a mode that supports the auto notch? Its not > supported in DATA or CW. > > ~Brett (KC7OTG) > > > On Sat, 2009-08-15 at 10:07 +0100, Stewart wrote: >> am finding the same here - AGH ! >> >> The Manual notch is fine, however, although there is a slight >> notching action in Auto it is virtually useless. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
