I noted the same issue with the autonotch. I kind of works but before the latest firmware the autonotch just made +20 and +40 tuner uppers just disappear. Now is still works but not like before. It sort of hunts for the carrier and kills 70%.
Dan Mike Harris wrote: > > G'day, > > After loading a firmware version I always powered down the K3 for > approximately 10 seconds. > > Regards, > > Mike VP8NO > > ----- Original Message ----- > From: "K9ZTV" <k9...@socket.net> > To: "Elecraft" <elecraft@mailman.qth.net> > Sent: Monday, August 17, 2009 1:36 PM > Subject: Re: [Elecraft] K3 Autonotch Gremlin > > >>I suspect the reason some are experiencing "not working" one day >>and >> "working" the next day is that they are overlooking the >> requirement to >> reboot the K3 following each firmware upgrade (just like a >> computer, >> which it is). >> >> 73, >> >> Kent K9ZTV >> >> >> >> >> Someone wrote: >>> When I downloaded v.3.25 the autonotch did not seem to work on >>> any band. The next day I tried the autonotch and it worked well >>> on a 40 meter broadcast heterodyne > > _ > ----- Dan AB3EN -- View this message in context: http://n2.nabble.com/K3-Autonotch-Gremlin-tp3460157p3463432.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
