OOOPs - my K3 Utility was back level. Just loaded 1.2.10.5 and did not have the problem either. That does not say that 1.2.9.30 is immune to your problem, but I don't think it is likely.
73, Don W3FPR Don Wilhelm wrote: > Brian, > > It works for me. > Be aware that there are several 'devices' that can be detected by K3 > Utility that are not actually a K3 (printer, scanner, many others). > In these cases, the Port Test will work because the device echoes > something to K3 Utility. This is especially true if you are using a > USB to serial converter - Windows sometimes gets the ports mixed up. > To confirm that the port you have selected in K3 Utility is really the > COM port that is connected to the K3, go to the Command window and > type in some mundane command - like "k3;" - if the K3 responds, you > have the correct port selected, otherwise, go to device manager and > sort out which com ports are configured. > > I just tried it here using K3 Utility 1.2.8.10 and my K3 loaded with > 3.41/2.37 firmware. I know this is Field Test firmware levels, but I > do not believe there have been any configuration save changes that are > recent. > > 73, > Don W3FPR > > Brian Alsop wrote: >> Installed this. >> >> Had it store my configuration file. >> >> It won't let me store it again. (I normally also store on a USB flash >> drive too) >> >> Clicking on store configuration does nothing. (It might flash >> something up for a microsecond....) >> >> Tried rebooting machine. Reinstalling utility. >> >> Same thing. >> >> The K3 is indeed connected. Port test says so. The choices are not >> grayed out. >> >> 73 de Brian/K3KO >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
