Thank you, Wayne. I just switched back. I will rerun the calibration tomorrow based on your advice. I had done so earlier without reading this and I did not follow the recommended process exactly as I had ordered my unit factory assembled.
73, Bill K9YEQ K2 #35; KX1 #35; K3 #1744; mini mods ATS-3B -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Wednesday, October 07, 2009 9:28 PM To: Wayne Burdick Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] S-meter calibration Typo. I meant to say SMTR NOR in the paragraph below. Wayne Wayne Burdick wrote: > We're going to add a final instruction to K3 Utility explaining that > SMTR OF and SC must be adjusted after running RF GAIN calibration. I > suggest doing this with SMTR MD = ABS, preamp ON. Under these > conditions you should be able to set SMTR OF and SC such that 50 uV > produces an S9 reading, and 1 uV results in S2 to S3..... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
