Stephen Prior wrote: > I'm getting a similar thing here. I have no KRX3 and have HRD (latest > version) communicating with the K3 at 38400 baud. If I send a series of > dahs, every so often the dah becomes a dit. If I send a series of dits then > that seems okay. > > The paddle is plugged directly into the K3 and there is no other software > trying to talk to the K3 at the same time. The connection between the PC > and the K3 is purely serial, no USB interface is involved. Latest K3 > firmware too. I have not noticed this behaviour before. It is independent > of both cw speed and rf output. If I close HRD the problem disappears.
Have you tried increasing the refresh interval in HRD? Tools / Program Options / Comms. I'm not near my radio now so I can't try it. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html