The Smiths wrote: > Actually Martin, I do use the RIT with the Split mode. Here's why: > > Some times when you're listening to the DX station, and other start > transmitting on top of him, > it's nice to RIT away from his beat Freq. up or down a little so that you >can move the shift knob over +/- and get rid of those other people. > Or just improve the ability to hear a weak signal once you've used the "auto > spot" feature. > > Although you're idea isn't all that bad, assuming it's off..
Ok, so what about this: A single-tap clears RIT if RIT is ON, does nothing if RIT is OFF; double-tapping clears RIT (if ON) *and* sets the RX-Vfo back to the configured offset. >> From: hamra...@vr-web.de >> To: elecraft@mailman.qth.net >> Date: Mon, 19 Oct 2009 23:11:41 +0200 >> Subject: [Elecraft] Feature request >> >> What do you elecrafters think about this: >> >> 1. When you are running SPLIT ( assuming RIT & XIT are OFF), tapping CLR >> puts the RX-VFO to the same frequency as the TX-VFO (TX). No one would >> run SPLIT and use RIT and/or XIT simultaneously, would you? >> >> 2. Or, even better: When you are running SPLIT, tapping CLR puts your >> RX-VFO a (config)-selectable number of +- khz (starting with 0 khz = no >> SPLIT) offset to your TX-VFO. This ensures that DXPeditioners or >> Contesters easily can return to their announced qsx-freq. >> >> Sorry for the bandwidth if there is already a method to accomplish this >> in a similar way. I must have missed it then. >> >> Martin >> -- 73, DM4iM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html