> 6) wait for tune successful (dig I/O on acc. skt).
I originally looked for similar support (an input line that would place the K3 in "tune" mode when closed) to support the "TF" function of the Yaesu Quadra. Unfortunately, the K3 has no uncommitted input (the only to input lines are FSK and XVTR-ON/TX Inhibit) the closest available option is Key In. One interesting option for AH-4 type tuners would be for the K3 to generate a one second pulse on DIGOUT 0 when the "Tune" button was pressed. This could be used to initiate a tune cycle in external tuners. Since a low to high transition on the Key In or PTT lines will already cause the K3 to end the "tune" signal, connecting the "tuning" signal to either PTT or Key In would automate the tuning operation with the AH-4 with no external interface except maybe some driver hardware. 73, ... Joe, W4TV > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Glen Torr > Sent: Thursday, October 29, 2009 4:42 AM > To: Elecraft@mailman.qth.net > Subject: [Elecraft] [K3] Macro control of AH-4 remote tuner > (and otherprojects). > > > Hi Wayne and all, > > Thanks for the invite to ask Q's about macros. > > I want a remote tuner for the K3 and have purchased an Icom > AH-4. I built a simple controller but have been thinking I > would program a PIC to automate the process but maybe macros > will provide a better solution. What I need to do is:- > > 1) obtain and store current power > 2) obtain and store current mode > 3) set power to 10 W > 4) set mode to CW > 5) key TX > 6) wait for tune successful (dig I/O on acc. skt). > 7) restore power to stored value. > 8) restore mode to stored value. > > I was looking at the programmers reference to see if this was > doable in a PIC but if I can do it in the K3 terrific. > > Secondly, when the KX1 was released an article by Wayne > appeared in the ARS Sojourner where Wayne said that at the > expense of current projects the KX1 was developed, was the > current project the K3? > > Thanks all, > > Glen VK1FB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html