Howdy Bill, My setup and usage is the same as yours. I wrote a little macro (one button push) that will put the K3 into split mode operation and move the CW REV frequency up a kHz so the SSB station can copy your CW. If you are interested, I can send it to you again. GL and VY 73, Lance
Bill Davis Jr wrote: > Thanks guys .... I'm sure NOT Being in VOX is the problem ...... RATS ... I > use a > sequencer to activate the K3 PTT and DO NOT use VOX. It is a feature > that I was counting on to simplify things too. Almost all of my K3 > applications are VHF/UHF and microwave where CW on USB is STANDARD, CW > reverse is close but I still have to retune when I change from > USB to CW. I didn't want to be forced to retune the frequency. > > > > Thanks again for all assistance > > > > 73 and good DX > > > > Bill K0AWU (54yrs on the air - Weak signal VHF/UHF and Microwave activity) > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX) P.O. Box 73 Frenchtown, MT 59834 USA QTH: DN27UB TEL: (406) 626-5728 URL: http://www.bigskyspaces.com/w7gj 2m DXCC #11/6m DXCC #815 Interested in 6m EME? Ask me about subscribing to the MAGIC BAND EME email reflector! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
