Paul, Sorry for your predicament! See "Parameter Initialization" on page 61 of the K3 manual, it explains the reset procedure in detail. Too much to repeat here.
73, Don W3FPR PAUL VANOVEREN wrote: > Playing around with my K3 serial # 756 and the setting for N1MM and > changed the DTR-RTS, or PTT settings and now the radio is in transmit always > on the 60 meter band and when I push the MENU, COFIG button, the firmware > version comes up, but if I rotate the B VFO to try and get to some other > menu item, it locks up, turning to the right bet to FL1 and locks and turing > to the right byp kat3 and locks up. Is there some way to do a soft or > hard reset and bring everything back to the default settings ??? Can't find > it in the owners manual...sorry.. > > Paul NF8J... > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.698 / Virus Database: 270.14.56/2491 - Release Date: 11/09/09 > 02:39:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
