We've greatly improved the way PTT works with the K3's digital voice
recorder. The latest field-test release, MCU rev. 3.62, behaves as
described below.
If you'd like to test this for us (quickly, so we can do another beta
release tomorrow), please email me directly.
tnx
Wayne
N6KR
* * *
MCU 3.62, 11-19-2009
* PTT USE WITH DVR: If the KDVR3 menu entry ‘1’ tap option
is set to AUTOPTT (the default), then PTT now behaves as follows:
- If you start DVR message play first (by tapping M1-M4), then
assert PTT during the message, DVR play will be cancelled.
- If you assert PTT first, then play a DVR message, it will
play normally, and will complete even if you let go of PTT.
You can also cancel DVR message play by tapping REC, as usual,
whether PTT is asserted or not. (Or cancel from a computer
using the “RX;” command – see below.)
Note: If the KDVR3 menu entry ‘1’ tap option is set to
USE PTT, then PTT is required as a qualifier for DVR
message play. In this case, releasing PTT in the middle
of a DVR message will cancel it.
Remote Control Command Changes:
* DVR MSG PLAY CANCEL: You can now use the “RX”
command to cleanly cancel DVR message play (as well
as any other transmit or message-play function, in any mode).
* CONFIG:DIGOUT1 MENU PARAMETER is now accessible
with the “MP" command. Values 000 and 001 only; get/set.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
