Thanks, Tom. The ATU was in bypass. Turning it on, tuning into the DL, and then putting it back into bypass cured it. As I said before, I don't understand that behavior, but if it worked, I'll just accept it.
Tom Hammond wrote: > Mike: > > Is ATU in BYPASS? If not, have you 'tuned' it into the D/L? > > 73, > > Tom N0SS > > At 18:20 11/21/2009, you wrote: >> K3/100 #3539 with KAT3, KXV3, KTCX01-1, 2.8, 400, 250 filters. MCU 3.57, >> FPF 1.06, DSP1 2.45. >> >> Transmitting into a dummy load, with nothing else in line, Antenna 1 >> shows an SWR of 7.1-1 on 20 meters. On 10 meters, SWR is 1.1-1 and I >> have a HI CUR flag. >> On all the other bands SWR is OK. >> >> SWR on antenna 2 is OK on all bands. >> >> What should I be looking at to fix this? >> >> Thanks, Mike NF4L >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html