You can hook up the ALC if you want, but don't need to. Just connect the amp to the keying line on the K3, and the antenna, and you are good to go. It only takes about 40 watts of drive from the K3 to get 400 plus out of the ALS-600.
Dave W7AQK ----- Original Message ----- From: "Bob Wehking" <rwehk...@cinci.rr.com> To: <Elecraft@mailman.qth.net> Sent: Tuesday, November 24, 2009 8:50 AM Subject: [Elecraft] K3 & ALS 600 >I have a K3, S/N 225 & an ALS 600, S/N 12911 that I would like to > interface. Do I need to connect the ALC to the amp. Anything else needed > to get the two to play together? > > Bob > WB8DDI > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
