Every once in a while firmware updates do result in changed CONFIG values. I suspect this results from user customized settings being changed back to default values as a result of new coding affecting specific functions.
After every update I run through the CONFIG bank to see which values, if any, I need to change back to my customized settings. Rarely do they change, and checking them usually takes all of two minutes. Saving the settings in the Utility would do it even quicker, but I enjoy knob twiddling more than key punching. I also trust my ability to knob twist more than I do my ability to handle the Utility. In any event, not a few postings could be avoided by checking and restoring your CONFIG values first before turning to the reflector. Furthermore, printing out a running copy of the /K3 Firmware Release Notes/ and keeping them in a 3-hole binder is a quick and easy way to find out how to /restore /CONFIG values you have previously changed. These /Notes/ are always more current than the /K3 Owner's Manual/. Plus . . . (perhaps the most important of all) . . . referring to the /Notes/ on a regular basis updates the brain on all the enhancements which have accrued (and will continue to accrue) to the K3. 73, Kent K9ZTV Someone wrote: > I believe that up until my last (the latest) firmware update my K3 had the > ability to send CW whilst listening in SSB mode. However I have lost that > ability and cannot find any menu or config setting which appears to relate > to that function. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
