Tim - I have a SteppIR yagi, and I ordered the 02114 cable from SteppIR to use with the K3. The ICOM cable won't work. I don't use it, but I'd guess you would go from the data out jack to any other device you wanted to control.
73, Mike NF4L w8jj wrote: > My objective is to use all of this equipment simultaneously providing there > is a way for all devices to receive the necessary data needed for operation. > I'm interested in having the SteppIR vertical and a wire antenna fed with > 450 Ohm ladder line available at all times on the same or different bands. > Is it conceivable for the vertical and the AT-AUTO to pick up frequency/band > data independently from each RX (main and sub)? I'm also concerned about > data port availability as the MK-2 connects to the K-3's RS 232 and ACC > ports. How will the other devices get data? The SteppIR box has a "data out" > port that my prove useful in this scenario. > > My K-3 was ordered on Monday (replacing Icom 756 PRO III) and I have the > rest of the equipment listed above in place. I'm trying to work through the > theory of operation with a K-3 in the mix. One major difference is that the > Palstar is set up to "handshake" with Icom radios using the external tuner > port on the radio. The K-3 will require a different approach, however. If > you're using a similar configuration, I'd love to hear from you. > > Any thoughts/suggestions? > > 73 Tim W8JJ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
