Bill, I find once I set on the PC it stays on even when I shut down. This may not be reflected in the current manual. I think there will be additional work on the software.
73, Bill K9YEQ -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Miner Sent: Monday, January 04, 2010 9:49 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] W2 Firmware Suggestion With all the recent discussion about the W2 I decided to actually read the on-line manual and check the specs for my self. Upon further reading I discovered that to set the SWR alarm feature it is necessary to have a PC connected and to set the alarm each time the unit is powered up. If possible, it would be nice to be able to turn on the alarm feature from the front panel of the W2 and once set, have the alarm enable in memory so that it was not necessary to do this every time the unit is power cycled.. OBTW I am very pleased with the current firmware load for the K3. Thanks & 73, Bill - K6WLM K3 K2 KX1 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html