You can also try borrowing an Icom Pro series (or presumably their larger 
radios as well), and hook the if out to the antenna input on the Pro, which 
will then act as a bandscope for the K3 when tuned to 8215 kHz..  I do this 
at P49Y (an idea from W0YK) and it works very well.
 73, andy, ae6y
----- Original Message ----- 
From: "Alan Bloom" <a...@elecraft.com>
To: <sr...@swbell.net>
Cc: <elecraft@mailman.qth.net>
Sent: Tuesday, January 12, 2010 1:55 PM
Subject: Re: [Elecraft] [K3] IF output


> You should hear whatever signals the K3 is tuned to.  I'm assuming you
> are connected to the IF OUT jack of the KXV3 or KXV3A.
>
> If you haven't done the IF output mod:
> http://www.elecraft.com/K3/mods/IF_Output_Buffer_Gain_Mod_Rev_A.pdf
> then the signal level will be lower than at the K3 antenna connector.
> But with the K3 preamp on, the difference is small.  If you can clearly
> hear something on the K3, then you should be able to hear it on the K2.
>
> Alan N1AL
>
>
> On Tue, 2010-01-12 at 15:05 -0600, sr...@swbell.net wrote:
>> I am trying to verify the output at the IF OUT jack on the back of
>> the K3. I have it connected to my K2 with the VFO set for 8215.00 and I 
>> see
>> or hear no signal at all. Shouldn't I see the output from the K3? Is the
>> signal that low that I won't even get a blip on the K2 receiver? Am I
>> missing something? I see no menu entry for enabling the IF output.  HELP
>>
>>
>> Stan Rife
>> W5EWA
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to