Yes, but you can't embed a conditional statement in a macro so being able to read the current ESSB state doesn't help. So under the constraints of macro coding, how to turn ESSB on/off independent of current state of ESSB?
Tnx/73, Barry N1EU On Mon, Jan 18, 2010 at 12:15 AM, Greg <a...@cablespeed.com> wrote: > Ooops....no bug. Radio was in CW mode. Duh! > > The first line show ESSB off, second line shows ESSB on. > > IC\x80\xA8\x94\x90\x80; > > IC\x80\xA8\x94\xB0\x80; > > So the status of Byte D tells you the status of ESSB. > > 73 > Greg > > > > On 1/17/2010 4:05 PM, Greg wrote: > > When looking at this Barry I thought maybe you could read the status of the > "+" icon on the LCD. That is supposed to be on if ESSB is on. I think a > bug got into the FW where the icon is no longer showing when in ESSB. > > This is from the current Programmer's manual... > > IC * (Misc. Icons and Status; GET only) > RSP format: ICabcde; where abcde are ASCII characters (Byte in Table 4 > below) used as collections flags (Bit > in table). Each flag represents the status of an LCD icon and/or specific > transceiver function. > Some functions whose status is indicated by IC command flags can be > controlled using emulation commands. For > example, the K3 can be put into TX TEST by sending SWH18. The condition can > be verified at any time using the > IC command (byte a, bit 5). Another example: ESSB (extended SSB) can be > turned on/off using an MN (menu) > command, followed by SWT11, simulating a tap of 1 on the keypad. Again, IC > can be used to verify the present > state (byte d, bit 5). > > > 73 > Greg > AB7R > > > > > > On 1/17/2010 12:35 PM, Barry N1EU wrote: > > Can someone please confirm: it is possible to toggle the TX ESSB on/off > value via macro (mn096;swt11;mn255;) but it is impossible to set it to a > known value of "on" or "off" ? > > Thanks/73, > Barry N1EU > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.432 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 > 07:35:00 > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.432 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 > 07:35:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html