NR settings are per-mode, but they'll be the same for a given mode on each receiver. I.e., you can't (at present) have different NR settings for CW on main vs. CW on sub.
NR on/off is per-band/per-receiver. This will be clarified in the next K3 manual (and before that, in the errata). 73, Wayne N6KR > > With Sub Rx ON, I can toggle NR ON/OFF in Sub Rx using bset. This does > not affect the ON/OFF status of the Main Rx. However, when I change > the > NR setting (press/hold NR) of the SubRx, that changes both the SubRx > and > Main Rx setting... just as Werner reports below. > 73, > Ken K3IU > > > ~~~~~~~~~~~~~~~~~~~~~~~~~ > On 1/26/2010 12:52 PM, Dr. Werner Furlan wrote: > > on my K3 with FW 3.76 loaded I can set NR settings with BSET for the > > subreceiver, but it is then changed also for the main receiver. I > can use > > NR on the main or sub or for both, but with the same NR settings > for the > > same mode. > > > > 73! de Werner OE9FWV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html