Also the KIO2 is not a RS-232 port ! You need to use the proper cable.
Phil K8MBY
K-3 #609 and several K-2's
----- Original Message -----
From: "Julian, G4ILO" <julian.g4...@gmail.com>
To: <elecraft@mailman.qth.net>
Sent: Wednesday, January 27, 2010 6:12 AM
Subject: Re: [Elecraft] K2 - KUSB PROBLEM
>
> The KUSB uses a Prolific chipset and it has problems when using slower
> baud
> rates and 2 stop bits. I experienced exactly the same behaviour with two
> different adapters (both using Prolific chipsets, though not bought from
> Elecraft) when I tested my K2 with KComm.
>
> I believe the Keyspan uses an FTDI chipset which is somewhat better.
> Therefore the solution is probably going to be to use the Keyspan. I did
> find that the Prolific adapters sometimes work better by setting the
> serial
> port settings to 1 stop bit, but the baud rate of the KIO2 is fixed at
> 4800
> so that can't be changed.
>
> -----
> Julian, G4ILO. K2 #392 K3 #222.
> * G4ILO's Shack - http://www.g4ilo.com
> * KComm - http://www.g4ilo.com/kcomm.html
> * KTune - http://www.g4ilo.com/ktune.html
>
> --
> View this message in context:
> http://n2.nabble.com/K2-KUSB-PROBLEM-tp4466419p4466529.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
