I use a MD-100 with my K3 with excellant results. I purchased a NCS Mulit-Switcher to do the task. I use the same mike on the K3, a Kenwood 2000 and my Yeasu FT-950. This switch works great on all.
Link: http://www.ncsradio.com/m_switch.html No, I don't know these guys.. de W4CCS On 1/29/2010 10:34 AM, Don Wilhelm wrote: > Dean, > > The K3 is permanently wired for the Elecraft mic configuration, so you > must either create an adapter or rewire your microphones for the > Elecraft pinout. If you choose to rewire the microphones, you will have > to change your K2 as well if you wish to use the same mic on both. > > After answering many questions about how to set the K2 microphone > configuration header for a wide variety of mics, I for one am glad that > the K3 does not have a configurable mic pinout. > > The K3 microphone jack pinout is in the K3 manual. > > 73, > Don W3FPR > > Dean wrote: > >> All of my mics are set up for standard Yaesu hf rigs including an MD-100 and >> an MH-31. My K2 was set up for this configuration too. >> >> Is it feasible to configure the K3 to use these mics? Or do I need to change >> all of the mic configurations? >> >> Thanks! >> >> Dean >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
