Claude, The mode (as well as the separate Data Mode) are 'per band' settings. Have you assured yourself that the mode was set to DATA on each band and the Data Mode (hold DATA MD button) was set to FSK D - I assume that is what you are using from your statement - you must use the ACC connector input pin for FSK, if you are using soundcard generated RTTY, then select AFSK and check that the mark frequency in your software is the same as the setting on the K3.
73, Don W3FPR Claude Du Berger wrote: > Hello Group > I am a new owner of a K3. > I was testing RTTY FSK before WPX and found > that it will only transmit on 10, 20 and 80m. > On other bands only have the red led... > Is there anything I should program? > > Thanks > Claude VE2FK > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
