Doug, Well, stuff like that happens to all of us at one time or another. When it happens to me, I just jot down a "Dear Dummy" note to myself and go on with life. Glad to hear you found it.
73, Don W3FPR Doug Heacock wrote: > Boy, is my face red. For the benefit of those who helped with suggestions > concerning my SSB issue (power output pegging and out of control on PTT), I > must confess that when I began looking at this again (for the first time in > several years), I had completely forgotten that when I removed the SSB > adapter years ago, I put the two jumper wires and the C167 capacitor back > (as the instructions say to do). But because I tacked them to the *bottom* > of the RF board, I didn't see them until last night, when I decided to > remove the bottom cover of the K2 case to nose around a bit on the RF board. > > I've removed the jumpers and the cap, and the out-of-control power output > problem is gone. I still don't know whether my SSB adapter is working > properly, because I don't actually have a real mic wired up yet (I've just > been using the dot key line as PTT)--I'll get a little electret element > wired up soon and give it a shot. > > Thanks again to those who offered suggestions--even though I was barking up > the wrong tree because of my own oversight, I learned a lot along the way! > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
