Craig, Did you do as suggested in the manual list of error messages? Check the circuit breaker first.
73, Don W3FPR Craig WØLV wrote: > I was running WPX RTTY contest using abt 80W and it had ran for over an hour > with no problems. I have done it many times and the PA temp stayed around > 50.... All of the sudden I received the ERR 12V. I was watching the PA > temp and it was staying around 45 to 49C. The rig was running 3 bars on > ALC, so was not overdriving the PA. Output was abt 80W. > > I went into the Config menu and turned the PA off and then back on and it > still does not show up in the display menu to monitor PA temp. I have power > cycled the rig and power supply a number of times and no luck??? > > Any Suggestions? All I can get out of it is 12 W now and the PA is cool. > Cold air out of the back of the rig. The Voltage from the power supply is > 13.9V and I have a solid connection to the PS. I cannot even get it to > display the PA temp at all now even when I go into the Config menu and make > sure it is turned on. PA is set to NOR in Config menu. > > Thanks > Craig WØLV > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.733 / Virus Database: 271.1.1/2685 - Release Date: 02/13/10 > 03:43:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
