Buck, That may be possible, though I've never had that happen before. But isn't there some way simply to clear the error and move forward? 73, andy, ae6y
-------------------------------------------------- From: <k...@aol.com> Sent: Saturday, March 20, 2010 8:12 PM To: <andrewfa...@ymail.com>; <Elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3 ERR KEY/PTT Problem > Most likely it is your logging control program that is already asserting > a > PTT signal when you turn on the radio. Check your PTT settings, RTS, DTR > . > Make sure you boot the logging software after you have the radio on. > > Buck > k4ia > k3 #101 > > > In a message dated 3/20/2010 9:03:15 P.M. Eastern Daylight Time, > andrewfa...@ymail.com writes: > Wayne, Eric and Gang, > I am planning to take my K3 to Aruba Tuesday night, but in testing it out > on > phone just now, I started getting ERR KEY messages, which change to ERR > PTT > if PTT is asserted. The radio seems to receive ok but won't transmit. > The > menus also don't appear. > The manual says this is due to asserting key or ptt line in power up, but > it happened when the radio was already on. > Not sure of the firmware I'm using (can't communicate with the radio) but > I think it's 3.83 and 2.54. The radio is Ser. 076. > Any thoughts? Need to fix this quickly for WPX, or I'll have to go back > to > using our Pro2 (ugh!) > 73, andy, ae6y > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
