I think if you set XV1 ADR to Int trn 1, it should work a lot better. See the manual to be sure.
73, matt W6NIA On Sun, 21 Mar 2010 06:02:00 -0800 (PST), you wrote: > > >Installed, set in menu >XV1 RF 144 >XV1 IF 28 >XV1 PWR L 1.50 >XV1 OFS 5.40 >XV1 ADR trn 1 > >LED flashes once when powered on > >Firmware sent (again) LED flashes appropriately. > >NO audio except FM hiss > >if 'MODE is changed from FM to CW or DATA or AM - band switches to 46.940 >(from 146.940) > >if above is done from 144.390 then with CW, DATA, or CW it switches to >44.390 > >I thought it was supposed to XVT with 28MHZ per XV1 IF 28 ?? > >nothing heard with a sig gen either. > >and of course no power out. > >Any suggestions please > >thanks John VE3NFK > >(the rest of the updates went fine except Synchro AM now has a NEW annoying >habit of 'clunking' as it crosses over 739.994 - 740.004 (medium wave am >station) which it didn't do before) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html