Brendan, That might be the issue here. The "Kenwood" selection in my logging software worked perfectly with my K2 and the FT1000MP. Now there is a specific "Elecraft" radio interface selection and it might be a bit different than that for the K2.
Thanks. (Nice to hear you on the net!) Terry, W0FM -----Original Message----- From: Brendan Minish [mailto:ei6iz.bren...@gmail.com] Sent: Monday, March 22, 2010 3:07 PM To: Terry Schieler Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] (K3) Mode change with band unpredictible Try this without having any software running and see if you have the same issue ? (very?) old kenwood radios needed the mode to be set before the frequency, this does not work so well on modern radios that remember mode on a per band basis On Dxbase I fixed this in the K3 radio configuration file by ensuring that the mode was sent AFTER the frequency rather than in the default order of mode then frequency ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
