I am: Using WIN 7 Ultimate.
Using Elecraft K3/100 set to "Data A" or to "USB." RS232 params set to 19200 + 1 stop. Using E'craft USB to RS232 adapter, which loads driver and selects COM13. Device manager shows COM13/19200/1 stop. Using SignaLink USB with E'craft cable to rear connections. Using either fldigi 3.12.5 or 3.20.b9...problem is the same with either. Using RigCat with K3.xml, 19200 + 1 stop on Com 13. Everything appears to be normal...receive OK, transmit OK via SignaLink, TX power levels correct, waterfall appears normal. Problem: NO CAT Control...no rig control (frequency) via fldigi. (Should be coming in on the RS232 line. Disconnecting the RS232 line has no effect.) On bringing up fldigi it throws an error "E: rigCAT_getfreq: Hexout failed" & in addition the "QSY" button on the bottom toolbar is greyed out. Both these are clearly related to the failure to communicate across the RS232 line. Any suggestions? John Ragle -- W1ZI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html