Hello Dick, tks for your answer. > It sounds like you might be confusing TX Gain cal with Ref > Calibration. All you need for TX gain calibration is a dummy load. Can > you perform the TX gain cal on all bands manually? This is the manual > procedure where you press tune on all bands. I am not confusing and performed all tests, however doing TX gain cal in all bands manually I always get a power of 0.0 watts. I get power when use ATU, then I see RF level that is power out. Just waiting for tips from you and Elecraft as well. > > I'm away from home now without the Owners Manual to refer to. Ok, no problem, it is in page 49. > > Dick, K6KR Best 73.
CT1DRB David Quental > > > Sent from my iPhone > > On Apr 18, 2010, at 3:52 AM, David Quental <ct1...@gmail.com> wrote: > >> Hello all, >> >> I still get ERR TXG and at same time, because lack of external antennas, >> I could not get the melthod 2 (zero-beating) on page 50 of Owner's >> Manual. Is there any other method to calibrate the Reference Oscillator >> using a computer ??? >> >> Any help will be welcome here, tks. >> >> CT1DRB >> David Quental >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html