Sorry, now I see that you did, in an earlier post. The context was lost (trimmed away) by the time the statement quoted below was made, so I took it at face value. I only remarked on this because the advice for any other rig in the world is to set audio for very little or no ALC indication. The requirement that the K3 be set for 4-5 bars of "ALC" has been a source of confusion for digital mode setup since the beginning, as a search of the archives will reveal.
Bob NW8L On Wed, Apr 28, 2010 at 11:10 PM, Don Wilhelm <w3...@embarqmail.com> wrote: > Bob, > > I thought I explained that the K3 "ALC" meter is like a VU meter for the > first 4 bars - the ALC indication starts at the 5th bar. > > 73, > Don W3FPR > > Bob Cunnings wrote: >> >> On Wed, Apr 28, 2010 at 8:14 PM, Don Wilhelm <w3...@embarqmail.com> wrote: >> >> >>> >>> but the K2 (and K3) control the output level prior to the balanced >>> modulator, and will have trouble if used that way. Set the power to the >>> level that is desired and then adjust the audio for no ALC for digital >>> modes. >>> >>> >> >> Except for the K3 which requires that audio be set for 4-5 bars ALC >> for digital modes. >> >> Bob NW8L >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
