Shame, that would allow individual values to be set up for each bc band of interest, along with mode, band, bwidth, filters, etc.
David G3UNA ----- Original Message ----- From: "drewko" <[email protected]> To: "David Cutter" <[email protected]> Cc: <[email protected]> Sent: Sunday, May 09, 2010 1:29 PM Subject: Re: [Elecraft] A few thoughts on the K3 as an AM SWBC receiver >I think you can change KAT3 from "Auto" to "LCSet" via macro but you > can't actually adjust the L/C values. But since the L/C settings are > not retained when switching back and forth to Auto there isn't much > point to the macro. > > 73, > Drew > AF2Z > > > On Thu, 06 May 2010 06:58:50 +0100, David G3UNA wrote: > >>Sorry if I missed it, but, can a manual setting be set by a macro? >> >>David >>G3UNA >> >> >>> >>> It would be nice if the K3 could remember the ATU mode (auto or >>> manual) per each tuning segment instead of just having it apply to the >>> entire swath of band. Then the SWBC segments would remember their >>> manual settings while the ham portions could remain in auto tune. >>> >>> 73, >>> Drew >>> AF2Z > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
