Jim, In FSK-D you need to make sure the PITCH setting on the K3 and the tones setup in the software match. So if you have the K3 set to 2125-170 the software MUST be set to 2125. If not you won't decode anything.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Jul 2 12:28 , "Jim McDonald" sent: >I just got my K3 back from being repaired and connected it to a new PC. I >hope I'm overlooking something simple in the configuration because I have no >audio output to the computer using the line out jack. I can decode PSK31 in >the DATA A mode and see the waterfall, but nothing with DATA D (FSK). I >turned the CONFIG: LIN OUT to maximum (nor 100) and even have the >soundcard's input level to maximum. > >I tried PSK receive with Digipan and am trying to set up MMTTY for FSK. > >Hopefully it's not a rig problem. > >I'm happy to be told I forgot something simple, so don't be shy about >insulting me with the obvious! Thanks. > >Jim N7US > > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: Elecraft@mailman.qth.net','','','')">Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html