Ditto. Bill K9YEQ K2 and KX1 field tester, K3 and modules
-----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jeff Cochrane - VK4BOF Sent: Monday, July 05, 2010 6:35 PM To: elecraft@mailman.qth.net Subject: [Elecraft] [K3] Feature request - Repeater Offset (Or not) saved per VFO? Hi everyone, I don't know if this has been asked for before, nor do I know if indeed it can be implemented but I'd like to see each VFO save its splits etc when changing between VFO A & B. To illustrate what I mean, I currently have 146.675MHz FM with a -600KHz offset setup in VFO A. I also have 146.500MHz FM setup in VFO B. (That I use in simplex mode) The problem is that the repeater offset stays on, no matter which VFO is in use and what I'd like is for the K3 to save the offset setting per VFO so that as I change VFO's, I also change from using a repeater offset to working simplex without having to remember to change the offset back to simplex manually. Can this be done? Thanks in advance, -- Jeff Cochrane VK4BOF Innisfail QLD Australia Elecraft K3 #4257 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html