Just ran this and it fails at 29MHz with high swr, somewhere between 2 and 4:1. Coax dummy load directly into Ant1 and gives high swr on both 5w and 50w using the K3 Utility as well as manually. All other bands fine (including 24MHz) and transmits fine on 28MHz when antenna matched using the KAT3.
Tried other dummy loads too - curious why it should be showing high swr only on 10m...... 73, Stewart Rolfe, GW0ETF (Tried that weird advice of 'tuning' the KAT3 into the dummy load to 'teach it the LC settings for Bypass' too but no difference) -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-Gain-calibration-fail-tp5264430p5264430.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
