Hello folks,
The K3 here is sometimes powered from DC AGM battery supply. Voltage can drop in the evenings on load to approx 12.0VDC. At 100W carrier a DVM reading at the anderson connectors shows close to 12 vdc; there is a small drop in the heavy power feed cable. The K3 LCD voltage displays approx .4 volts lower. This may be an issue when the AGM batts drop below 12 vdc. Just wondering if the internal measurment is showing some loss in the cabinet wiring or anderson connectors ? cheers paul zl1ajy -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-DC-power-supply-voltage-tp5281684p5281684.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html