I use the Digi Keyer here and also PR6. Found it very easy to open the plug coming from the Digikeyer that connects to the acc connector on the K3, and solder in the white wire coming from the PR6. I didn't find the connector filled with anything.
73, Tim - N3XX ----- Original Message ----- From: "Bill Henderson" <b...@brofcally.plus.com> To: <elecraft@mailman.qth.net> Sent: Sunday, July 18, 2010 10:56 AM Subject: Re: [Elecraft] K3 & microKeyer2 > > Jim > > Thanks for taking the time to reply. > > I don't think that my 2nd question was clear. It is the D connector for > the > microKeyer 2 that is filled with stuff and not that of the Pro6 amp. > > If I can't get the white wire from the Pro6 into the microKeyer2 D > connector > what do I do? > > 73 > > Bill > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-microKeyer2-tp5308352p5308978.html > Sent from the [K3] mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
