No problem! It's an interesting board to play with. Glad it worked for you!
On Sun, Oct 26, 2014 at 10:23 PM, Thiago Tenório Jordão de Vasconcelos < [email protected]> wrote: > Jeremy, that worked, thanks! > > Atenciosamente, > > Thiago Vasconcelos > > -- > Programador Web > Portfolio: http://thiagottjv.com > Fone:+55-81-96320562 > > On Sun, Oct 26, 2014 at 4:08 AM, Jeremy Hoel <[email protected]> wrote: > >> Boot into an interactive shell (F2, boot options, interactive shell) then >> from there you can FS0: then run the FirmwareUpdate.efi >> >> On Sun, Oct 26, 2014 at 7:05 AM, Thiago Tenório Jordão de Vasconcelos < >> [email protected]> wrote: >> >>> I just have to put both files on a USB driver and run the EFI? >>> Just that? I was trying to build the whole thing before I gave up. =/ >>> >>> I'll try that, Jeremy, thanks! >>> Em 25/10/2014 22:46, "Jeremy Hoel" <[email protected]> escreveu: >>> >>> Yup.. I found the firmware here: >>>> >>>> https://uefidk.com/content/minnowboard-max >>>> >>>> Each zip has two bin files, a D02 and R02.. the D02 I assumed was debug >>>> so I installed the R02. >>>> >>>> >>>> I used the FirmwareUpdate.efi from the minnowboard package that John >>>> mentioned in Augest >>>> https://bugzilla.yoctoproject.org/attachment.cgi?id=2087 (that's a 64 >>>> bit version) >>>> >>>> >>>> On Fri, Oct 24, 2014 at 2:32 AM, Thiago Tenório Jordão de Vasconcelos < >>>> [email protected]> wrote: >>>> >>>>> Jeremy, >>>>> >>>>> Did you updated the firmware? >>>>> How can I do that? I saw on the uefidk.com site but is too >>>>> complicated (compared with the Original board). >>>>> >>>>> Atenciosamente, >>>>> >>>>> Thiago Vasconcelos >>>>> >>>>> -- >>>>> Programador Web >>>>> Portfolio: http://thiagottjv.com >>>>> Fone:+55-81-96320562 >>>>> >>>>> On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <[email protected]> wrote: >>>>> >>>>>> Never mind.. I found my problem. Minnowboard Max.. not Minnowboard. >>>>>> All better now. >>>>>> >>>>>> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> So, following the instructions from here (1) I grabbed the files for >>>>>>> both the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick >>>>>>> and >>>>>>> booted the MM. When I got to the interactive efi boot, I was able to >>>>>>> get >>>>>>> to the USB drive and when I run the command 'FirmwareUpdate -f >>>>>>> MINNOW.fd' I >>>>>>> get the message "Image type IA32 is not supported by this X64 shell". >>>>>>> >>>>>>> Now, there is not other options for the FirewareUpdate or the >>>>>>> MINNOW.fd files.. there are no other files referencing x64 or X32. >>>>>>> >>>>>>> >>>>>>> Am I missing something? >>>>>>> >>>>>>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> elinux-MinnowBoard mailing list >>>>>> [email protected] >>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> elinux-MinnowBoard mailing list >>>>> [email protected] >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> elinux-MinnowBoard mailing list >>>> [email protected] >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >>>> >>>> >>> _______________________________________________ >>> elinux-MinnowBoard mailing list >>> [email protected] >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >>> >>> >> >> _______________________________________________ >> elinux-MinnowBoard mailing list >> [email protected] >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >> > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
