Hi, I found a workaround.
I put FirmwareUpdate.efi and the BIOS file MNW2MAX1.X64.0073.R02.1409160934.bin on an USB stick, boot into efi shell (this happens automatically if no other boot device is plugged in) and do an firmware update. After that the newly flashed BIOS boots with the default setting fastboot disabled. This is not a nice solution, but it worked for me. Best regards, Martin Von: Krause Martin Gesendet: Donnerstag, 13. November 2014 09:22 An: '[email protected]' Betreff: Fastboot - unable to get to BIOS setup on minnowboardmax Hi, I build version 0.73 from source and updated it on my minnowboardmax. Everything was running fine. Then I enabled fastboot in the BIOS setup, and now I'm unable to get to the BIOS setup screen again. I tried pressing F2 at startup, I tried typing 'exit' in the EFI Shell, I tried it with and without bootable SD card plugged and I tried it with and without network plugged in. I also tried it with a cold boot (switching off and on the 5 V) and with the onboard switch SW1. But nothing worked. Is there any other trick I can test to get to the BIOS to disable fastboot? Viele Grüße, i.A. Martin Krause Entwicklung Tel. +49 8153 9308-157, Fax +49 8153 9308-7157 mailto: [email protected]<mailto:[email protected]> TQ-Systems GmbH Schulstr. 29, D-82234 Weßling Amtsgericht München, HRB 105 018, UST-IdNr. DE 252 251 764 Sitz der Gesellschaft: Seefeld Geschäftsführer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Rüdiger Stahl http://www.tq-group.com/ Besuchen Sie uns / Visit us: electronica, Munich, November 11 - 14, 2014, Hall A6, Stand 307 Compamed, Düsseldorf, November 12 - 14, 2014, Hall 8a SPS/IPC/Drives, Nuremberg, November 25 - 27, 2014, Hall 4, Stand 249
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
