Daniel, Can you please check to see if the metal processing plate has been removed from the bottom of the HighSpeedExpansion connector? This plate is suppose to be removed before shipping, and if it hasn't been it could short out the board. Please check here for images of the plate:
http://elinux.org/Minnowboard:MinnowMax_HSE_issue thanks Dave Anders -----Original Message----- From: Darren Hart [mailto:[email protected]] Sent: Thursday, March 12, 2015 10:42 AM To: MinnowBoard Development and Community Discussion Cc: Anders, David Subject: Re: [MinnowBoard] No EUFI shell - No Display - D2 LED never Turns on On 3/12/15, 8:16 AM, "Daniel Reagan" <[email protected]> wrote: >Hello All, > >I just got my hands on a minnowboard MAX with intentions of using it >for a remote UAV/Camera controller. >I'm a Mechanical(first problem) Engineering graduate student at UMass >Lowell > > >I have so far been unsuccessful at viewing the EUFI shell through >serial or HDMI > >My main concern is that the D2 LED has never turned on, ever. I havn't >heard of that symptom in any prior posts. Are you pressing the power button after plugging in the barrel connector? If so, and you never see D2 come on, it's very possible you have a bad board. I suggest disconnecting everything. Plug in the power connector. Verify D1 comes on. Press and release the power button, if D2 doesn't come on, we should look at an RMA. David, did I get that right? -- Darren Hart Intel Open Source Technology Center _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
