Thank you John. We just removed ours, seems we have been very lucky over the last few months as our boards are not damaged. Cheers, ------------------------ John Roach MinLog Australia Tel +61 (2) 49687102 [email protected]
On 13 March 2015 at 04:59, John Hawley <[email protected]> wrote: > Quick heads up!!! > > We are getting reports that a plate is getting left over the HSE (High > Speed Expansion) header from manufacturing. This is *BAD*, and will > likely lead to your board becoming irreparably damaged. > > If you have received a board recently please double check your HSE > (bottom of the board) and see if there's a metal plate there. If it is > *PLEASE* remove it before using your board. > > If your board develops issue, and you have this plate over your HSE > please contact rma (at) minnowboard.org > > More details can be found at > http://elinux.org/Minnowboard:MinnowMax_HSE_issue > > You can find a quick image that shows what the HSE should look like with > and without the plate. > > Thanks! > > - John 'Warthog9' Hawley > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
