Unless there's something you need in the 0.80 firmware, you may want to just back it down to 0.79 for now while we investigate more fully.
- John 'Warthog9' Hawley On 6/9/2015 6:37 PM, Wei, David wrote: > /MNW2MAX1.X64.0080.R01.1505111746/ firmware has “Enabled Dual-HDMI > display outputs”. This should be the cause of this problem. Android > and firmware team have started to look at this issue. > > > > > > Thanks, > > David | SSG BIOS > > > > *From:*elinux-MinnowBoard > [mailto:[email protected]] *On Behalf Of *Dave > Smith > *Sent:* Tuesday, June 09, 2015 10:33 PM > *To:* [email protected] > *Subject:* [MinnowBoard] Fastboot Problems - Android Bring-up > > > > Hello all - > > > > I’m going through my first run with the MinnowBoard attempting to load > the pre-built Android package: > > https://01.org/android-ia/guides/android-5.x-lollipop-bring-guide > > > > I was able to successfully flash the latest firmware, so my board is now > running: > > /MinnowBoard MAX B3 Platform/ > > /MNW2MAX1.X64.0080.R01.1505111746/ > > > > I downloaded the Android 5.1.0_r1 package for 64-bit from the above link. > > > > I am now attempting to boot into fastboot and flash the image. I have > successfully flashed the image onto USB media, but when I attempt to > boot from that device there are no graphics on the screen (after the > secure boot warning), and I can’t do anything useful from the serial > console. > > > > Here is what I see out the serial console after selecting the USB media > as the boot device (and pressing up to bypass the secure boot screen): > > ***** > > entering Fastboot mode > > Locating boot image from file \fastboot.img > > Read boot image from file (13669676 bytes) > > verify Fastboot boot image > > decoding keystore data > > BootSignature format version 1 > > > > get boot image header > > decoding boot image signature > > BootSignature format version 1 > > > > verifying boot image > > chainloading fastboot, boot state is ORANGE > > chainloading boot image, boot state is ORANGE > > Creating command line > > Loading the ramdisk > > ramdisk size 5204458 > > Loading the kernel > > [ 0.019057] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > > [ 0.019057] ENERGY_PERF_BIAS: View and update with > x86_energy_perf_policy(8) > > [ 0.098678] EM:OEM0 table not found!! > > [ 0.415527] intel_setup_crystal_cove_sd_regulators: no match device found > > [ 0.700807] hpet: number irqs doesn't agree with number of timers > > [ 0.786072] ------------[ cut here ]------------ > > [ 0.791287] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:52 > sysfs_warn_dup+0x86/0xa0() > > [ 0.799785] sysfs: cannot create duplicate filename > '/devices/virtual/extcon/hdmi' > > [ 0.808710] ---[ end trace 386b12882abb18b3 ]--- > > [ 0.813927] ------------[ cut here ]------------ > > [ 0.819123] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 > kobject_add_internal+0x284/0x3f0() > > [ 0.828776] ---[ end trace 386b12882abb18b4 ]--- > > [ 0.938056] mei_txe 0000:00:1a.0: TXE8086: acpi __CRS resource not found > > [ 0.989940] intel_byt_dts_thermal: request_threaded_irq ret -22 > > [ 1.032730] intel_rapl: RAPL domain package detection failed > > [ 1.039106] intel_rapl: RAPL domain core detection failed > > [ 1.045197] intel_rapl: RAPL domain uncore detection failed > > [ 1.051464] intel_rapl: RAPL domain dram detection failed > > [ 1.057555] intel_rapl: no valid rapl domains found in package 0 > > [ 1.084405] otg_wakelock_init: No USB transceiver found > > [ 1.090902] init: failed to probe driver -19 > > [ 1.098274] had: Vidya: Enter alsa_card_intelhad_init > > [ 1.209036] init: could not import file '/init.userfastboot.rc' from > '/init.rc' > > [ 1.494081] init: /dev/hw_random not found > > [ 1.499939] init: /dev/hw_random not found > > [ 1.514801] init: Warning! Service dhcpcd_eth0 needs a SELinux > domain defined; please fix! > > [ 1.533180] userfastboot: starting graphics > > [ 1.575054] ------------[ cut here ]------------ > > [ 1.575070] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.575247] ---[ end trace 386b12882abb18b6 ]--- > > [ 1.575250] ------------[ cut here ]------------ > > [ 1.575256] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.575409] ---[ end trace 386b12882abb18b7 ]--- > > [ 1.575411] ------------[ cut here ]------------ > > [ 1.575417] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.575569] ---[ end trace 386b12882abb18b8 ]--- > > [ 1.575571] ------------[ cut here ]------------ > > [ 1.575578] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.575735] ---[ end trace 386b12882abb18b9 ]--- > > [ 1.575741] ------------[ cut here ]------------ > > [ 1.575747] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.575919] ---[ end trace 386b12882abb18ba ]--- > > [ 1.575922] ------------[ cut here ]------------ > > [ 1.575929] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.576069] ---[ end trace 386b12882abb18bb ]--- > > [ 1.576070] ------------[ cut here ]------------ > > [ 1.576076] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.576216] ---[ end trace 386b12882abb18bc ]--- > > [ 1.576219] ------------[ cut here ]------------ > > [ 1.576225] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.576368] ---[ end trace 386b12882abb18bd ]--- > > [ 1.576389] ------------[ cut here ]------------ > > [ 1.576395] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.576536] ---[ end trace 386b12882abb18be ]--- > > [ 1.576538] ------------[ cut here ]------------ > > [ 1.576544] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11879 > intel_modeset_check_state+0x66f/0x770() > > [ 1.576684] ---[ end trace 386b12882abb18bf ]--- > > [ 1.576685] ------------[ cut here ]------------ > > [ 1.576691] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.576858] ---[ end trace 386b12882abb18c0 ]--- > > [ 1.576861] ------------[ cut here ]------------ > > [ 1.576868] WARNING: CPU: 1 PID: 1685 at > drivers/gpu/drm/i915/intel_display.c:11900 > intel_modeset_check_state+0x62a/0x770() > > [ 1.577012] ---[ end trace 386b12882abb18c1 ]--- > > [ 1.859978] usb 1-2: ep 0x81 - rounding interval to 64 microframes, > ep desc says 80 microframes > > [ 1.869761] usb 1-2: ep 0x82 - rounding interval to 1024 microframes, > ep desc says 2040 microframes > > [ 2.039315] userfastboot: graphics OK > > ***** > > > > The DHCP error in that list has me a bit worried since provisioning is > supposed to happen over Ethernet. > > From the console, I can access a shell prompt. > > > > Any help is greatly appreciated! > > -- > Dave Smith, PE > > @devunwired > > > > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
