The documentation for the [6-Wire serial console](http://www.elinux.org/Minnowboard:MinnowMax#6-Wire_Serial_Console) suggests pretty strongly that CTS, VCC and RTS are hooked up to pins 2,3, and 6, respectively.
On page 8 of 29, [the schematic](http://www.elinux.org/images/f/ff/002-0004205_reva2_SCH_PUBLIC.pdf) shows that only pins 1, 4, and 5 are connected to anything (gnd, rx, and tx). The docs for the [4-Wire serial console](http://www.elinux.org/Minnowboard:MinnowMax#4-Wire_Serial_Console) configuration make it clear that pin 3 isn't connected to anything. Would it be correct/clearer to say something similar for the 6-Wire configuration? Thanks, g. _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
