I had the same issue as Peter (broken F1). At the time, the only walkaround was using a powered USB Hub. I asked on this board how can I get the board back to its functionality, but sadly I was not given any advice, even from CircuitCo.
2015-07-01 14:58 GMT-05:00 peter <[email protected]>: > Hi Sidney, > > I had the same effect with my Minnow Board. Someone here suggested to > check fuse F1 (to the left of the USB connector). It was blown although > there was just a keyboard connected to the board. > > Peter > > > On 01.07.2015 21:15, Sydney Lybert wrote: > >> Hello, >> >> >> I recently purchased a Minnowboard. I was attempting to install an OS on >> it (Ubuntu 14.04.2). During the installation, it suddenly died, and now >> the USB connections won't pick up any USB devices. Any ideas why this >> would happen? I've tried disconnecting the power and restarting >> everything with the USB devices already connected, and I've tried >> powering on the board and then connecting the devices, to no avail. >> >> >> Thanks, >> >> -Sydney Lybert >> >> >> >> _______________________________________________ >> elinux-MinnowBoard mailing list >> [email protected] >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >> _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
