Where are you getting to in the boot process? Are you getting to the UEFI shell? If you are typing `exit` at the shell will drop you into the firmware menu and you can either change the boot order or specifically select a bootable from there.
If you are at the shell and don't want to work through the menu you can always take a look and see if there is an FS0: present, if so the shell acts like random pieces taken from dos shell and a *nix shell, drive letters matter (so `fs0:` will change your drive), and `cd` and `ls` work. If you can get into the drive you can likely find the .efi executable for the distro, bootx64.efi, and grubx64.efi are the typical common ones. - John On 11/11/2015 04:24 AM, Nicolas Gallo wrote: > Hello! > > I've just received my Minnowboard Max in the mail and I'm very excited > to install Ubuntu onto it. I've run into a problem with the installation > process. I was able to successfully create a bootable pen drive and > enter into the installation process on my Minnowboard. I ran into an > error which I couldn't escape so I rebooted my board. After rebooting > the minnow won't boot from the pen drive again. > > I'm not sure what to do? Is there a factory reset for the board? Did I > corrupt something in the BIOS? > > I tried burning the ISO again onto my pen drive to see if I corrupted > any files on it but the pen drive is fine and my main computer > recognizes it without a hitch. > > > Thanks! > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
