Hello,
I would like to power my Minnowboard with an ATX PSU because I need different
voltages.
As I use a PCIE Lure I can't use the 5V stanby of the PSU, there is no enough
ampere to power the card.
So I can't control the psu switch on/off directly with the minnowboard.
I would like the same behaviour as a classic computer, using the power switch
button, shutdown linux and at the end the PSU
or linux shutdown switch off the PSU too.
I would need an intermediate "PSU controller board" that can send a shutdown
signal to
the minnowboard when I use the power switch, and the minnowboard can also send
a software shutdown to the "psu controller".
Do you know a specific controller board like that ? Outside an arduino board,
expansive solution for that.
Or other Ideas.
thank in advance for your wisdom.
Cet e-mail a été envoyé depuis un ordinateur protégé par Avast.
www.avast.com
_______________________________________________
elinux-MinnowBoard mailing list
[email protected]
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
